Product Details

Shock absorber-Optional item

SLA angle joint

Product introduction

SLA angle joint

The normal buffer working conditions allow an allowable angular angle of impact within ±25°, but if it exceeds this range, the torque experienced by the piston rod will be greatly increased, resulting in bending deformation of the buffer piston rod.

 

Users can choose CJAC SLA angle adapter, which is suitable for occasions where the eccentric angle is too large, and the bearing range is effectively widened to achieve flexible damping effect at the end of the non-linear impact traverse, which improves the stability of product use.

 

Eg.SLA (8, 10, 12) can withstand a 12.5° angling impact, and SLA (14, 20, 25) can withstand a 25° angling impact.

Model SLA0806 SLA1005 SLA1007-S SLA1008 SLA1210 SLA1408 SLA1410 SLA1412 SLA1415 SLA1416 SLA1420 SLA1425 SLA1612 SLA2015-S SLA2016 SLA2020 SLA2025 SLA2030 SLA2525 SLA2530 SLA2725 SLA3625 SLA4250-NH SLA4275-W SLA4525-N
A
(mm)
11 13 13 13 16 18 18 18 18 18 18 18 20 25 25 25 25 25 36 36 36 45 64 52 64
B
(mm)
11 10.6 12.6 13.6 18 16 18 20 23 24 28 33 20 26.3 27.3 31.3 36.3 41.3 38 43 38 87 139.5 148 92.5
C
(mm)
- 11 11 11 13 15 15 15 15 15 15 15 17 22 22 22 22 22 32 32 32 40 61 50 61
D
(mm)
4 5 5 5 6 8 8 8 8 8 8 8 8 11 11 11 11 11 15 15 15 20 35 32 35
E
(mm)
10 11 11 11 14 16 16 16 16 16 16 16 16 20 20 20 20 20 30 30 30 5 - 15 -
M M8x1.0 M10x1.0 M10x1.0 M10x1.0 M12x1.0 M14x1.5 M14x1.5 M14x1.5 M14x1.5 M14x1.5 M14x1.5 M14x1.5 M16x1.5 M20x1.5 M20x1.5 M20x1.5 M20x1.5 M20x1.5 M25x1.5 M25x1.5 M27x1.5 M45x1.5 M64x2.0 M52x1.5 M64x2.0
P
(mm)
M8x1.0 M10x1.0 M10x1.0 M10x1.0 M12x1.0 M14x1.5 M14x1.5 M14x1.5 M14x1.5 M14x1.5 M14x1.5 M14x1.5 M16x1.5 M20x1.5 M20x1.5 M20x1.5 M20x1.5 M20x1.5 M25x1.5 M25x1.5 M27x1.5 M36x1.5 M42x1.5 M42x1.5 M45x1.5
S
(mm)
6 5 7 8 10 8 10 12 15 16 20 25 12 15 16 20 25 30 25 30 25 25 50 75 25
Corresponding illustration 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 3 2 3

※ For shell specifications, please contact us for further details.